DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE

TECHNICAL PRODUCT BULLETIN #SW-49
USEPA, OIL PROGRAM CENTER
ORIGINAL LISTING DATE: NOVEMBER 10, 2010
“DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE”

I. NAME, BRAND, OR TRADEMARK
DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE
Type of Product: Surface Washing Agent
II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT
Orange-Sol Blending and Packaging
1400 N Fiesta Boulevard
Gilbert, AZ 85233
Phone: (800) 877-7771
Fax: (480) 497-0444
E-mail: amf@orange-sol.com
Web Site: http://www.orange-sol.com Exit
(Mr. Albert Farnsworth)
(Mr. Jack Farnsworth at (480) 319-0141)
III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS
Bell Tech
Master Distributor
P.O. Box 2198
Valdez, AK 99686
Phone: (907) 602-0111
Fax: (907) 835-4535
E-mail: bellenterprise@cvinternet.net
(Mr. Randy Bell)
IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION
1. Flammability: Non-combustible
2. Ventilation: No special requirements
3. Skin and eye contact; protective clothing; treatment in case of contact: No special equipment of clothing required; however, goggles are recommended where splash is potential. If eye or skin irritation occurs, flush with ample fresh water.
4.a. Maximum storage temperature: 210°F
4.b. Minimum storage temperature: 34°F
4.c. Optimum storage temperature range: 55°F to 90°F
4.d. Temperatures of phase separations and chemical changes: There are no known phase separations, chemical changes, or other altercations that will change the effectiveness of the product.
V. SHELF LIFE
Two (2) years in sealed drums or totes (as delivered).
VI. RECOMMENDED APPLICATION PROCEDURE
1. Application Method: DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE can be used on all oil coated surfaces including sand and rocks through a detergency mechanism. Product should be used with handheld sprayers or for larger applications applied with truck mounted sprayers. Remove contamination with DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE, followed by a rinse.
2. Concentration/Application Rate: For oil spill removal and heavy duty cleaning, dilute product with water using a 1:1 ratio.
3. Conditions for Use: DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE can be used in salt or fresh water, with no limitations as to usage within the optimum temperature parameters (application may be made at or above 35°F, with optimum above 48°F). Cleaning of oil soaked areas should be done in a contained area and residue should be collected. For sand or vegetation cleaning, a berm may be constructed down slope that will collect the residue for disposal. All disposal residues should be done according to federal, state, and local regulations. In general, the technique used for collection of the oil/soap residue should be determined by the on site contractor based on the environment of the area to be cleaned and the equipment and materials available for collection. Cleanup residue should be collected and disposed of in accordance with local, state, and federal regulations.
VII. TOXICITY AND EFFECTIVENESS
a. Toxicity:
Material Tested Species LC50 (ppm)
DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE Menidia beryllina
Mysidopsis bahia
20.95 96-hr
30.95 48-hr
No. 2 Fuel Oil Menidia beryllina
Mysidopsis bahia
4.07 96-hr
0.86 48-hr
DE-SOLV-IT CLEAN AWAY APC SUPER CONCENTRATE &
No. 2 Fuel Oil (1:10)
Menidia beryllina
Mysidopsis bahia
6.42 96-hr
0.69 48-hr
Reference Toxicant (SLS) Menidia beryllina
Mysidopsis bahia
12.04 96-hr
8.19 48-hr

b. Effectiveness:
NA

VIII. MICROBIOLOGICAL ANALYSIS
NA
IX. PHYSICAL PROPERTIES
1. Flash Point: >93°C
2. Pour Point: +20°F
3. Viscosity: 3.1 cst @ 40°C
4. Specific Gravity: 1.024 @60°F
5. pH: 9.03
6. Surface Active Agents: PROPRIETARY
7. Solvents: PROPRIETARY
8. Additives: Yes
9. Solubility: 100 percent
X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS
Compound Concentration (ppm)
Arsenic <1.0
Cadmium <0.5
Chromium <0.5
Copper <2.0
Lead <1.0
Mercury <0.005
Nickel <1.0
Zinc <2.5
Cyanide 0.08
Chlorinated Hydrocarbons <0.05

Top of Page