Types of Crude Oil
The petroleum industry often characterizes crude oils according to their geographical source, e.g., Alaska North Slope Crude. However, classification of crude oil types by geographical source is not a useful classification scheme for response personnel. This classification offers little information about general toxicity, physical state, and changes that occur with time and weathering. These characteristics are primary considerations in oil spill response. The classification scheme provided below is more useful in a response scenario.
Class A: Light, Volatile Oils. These oils are:
- highly fluid,
- often clear,
- spread rapidly on solid or water surfaces,
- have a strong odor,
- high evaporation rate, and
- are usually flammable.
They penetrate porous surfaces such as dirt and sand, and may be persistent in such a matrix. They do not tend to adhere to surfaces. Flushing with water generally removes them. Class A oils may be highly toxic to humans, fish, and other organisms. Most refined products and many of the highest quality light crudes can be included in this class.
Class B: Non-Sticky Oils. These oils have a waxy or oily feel. Class B oils are less toxic and adhere more firmly to surfaces than Class A oils, although they can be removed from surfaces by vigorous flushing. As temperatures rise, their tendency to penetrate porous substrates increases and they can be persistent. Evaporation of volatiles may lead to a Class C or D residue. Medium to heavy paraffin-based oils fall into this class.
Class C: Heavy, Sticky Oils. Class C oils are characteristically:
- sticky or tarry, and
- brown or black.
Flushing with water will not readily remove this material from surfaces, but the oil does not readily penetrate porous surfaces. The density of Class C oils may be near that of water and they often sink. Weathering or evaporation of volatiles may produce solid or tarry Class D oil. Toxicity is low, but wildlife can be smothered or drowned when contaminated. This class includes residual fuel oils and medium to heavy crudes.
Class D: Nonfluid Oils. Class D oils are:
- relatively non-toxic,
- do not penetrate porous substrates, and
- are usually black or dark brown in color.
When heated, Class D oils may melt and coat surfaces making cleanup very difficult. Residual oils, heavy crude oils, some high paraffin oils, and some weathered oils fall into this class.
These classifications are dynamic for spilled oils. Weather conditions and water temperature greatly influence the behavior of oil and refined petroleum products in the environment. For example, as volatiles evaporate from a Class B oil, it may become a Class C oil. If a significant temperature drop occurs (e.g., at night), a Class C oil may solidify and resemble a Class D oil. Upon warming, the Class D oil may revert back to a Class C oil.