Information about the Presidential Green Chemistry Challenge
The Presidential Green Chemistry Challenge Awards promote the environmental and economic benefits of developing and using novel green chemistry. These prestigious annual awards recognize chemical technologies that incorporate the principles of green chemistry into chemical design, manufacture, and use.
EPA’s Office of Chemical Safety and Pollution Prevention sponsors the Presidential Green Chemistry Challenge Awards in partnership with the American Chemical Society Green Chemistry Institute® and other members of the chemical community including industry, trade associations, academic institutions, and other government agencies.
For 2015 EPA is pleased to announce a new award category for a green chemistry technology that has a "Specific Environmental Benefit: Climate Change."
Throughout the 20 years of the awards program, EPA has presented awards to 104 winners. Since its inception, in 1996, EPA has received over 1,500 nominations. By recognizing groundbreaking scientific solutions to real-world environmental problems, the Presidential Green Chemistry Challenge has significantly reduced the hazards associated with designing, manufacturing, and using chemicals.
Through 2015, our 104 winning technologies have made billions of pounds of progress, including:
- 826 million pounds of hazardous chemicals and solvents eliminated each year—enough to fill almost 3,800 railroad tank cars or a train nearly 47 miles long.
- 21 billion gallons of water saved each year—the amount used by 820,000 people annually.
- 7.8 billion pounds of carbon dioxide equivalents released to air eliminated each year—equal to taking 810,000 automobiles off the road.
These data are from award-winning nominations for the Presidential Green Chemistry Challenge. Adding the benefits from the nominated technologies would greatly increase the program’s total benefits.
Use the tabs above to learn more about participating in the Challenge or download the same information in booklet format.
Next topic: Award categories
EPA usually presents one Presidential Green Chemistry Challenge Award in each award category. For the 2015 competition, there are six award categories:
- Focus Area 1: Greener Synthetic Pathways
- Focus Area 2: Greener Reaction Conditions
- Focus Area 3: The Design of Greener Chemicals
- Small Business* (for a technology in any of the three focus areas developed by a small business)
- Academic (for a technology in any of the three focus areas developed by an academic researcher)
- Specific Environmental Benefit: Climate Change (for a technology in any of the three focus areas that reduces greenhouse gas emissions)
*A small business for purposes of this award must have annual sales of less than $40 million, including all domestic and foreign sales by the company, its subsidiaries, and its parent company.
Eligibility and scope of the Presidential Green Chemistry Challenge Program
To be eligible for an award, a nominated technology must meet the scope of the Presidential Green Chemistry Challenge Program by meeting each of these six criteria:
- It must be a green chemistry technology with a significant chemistry component
- It must include source reduction
- It must be submitted by an eligible organization or its representative(s)
- It must have a significant milestone in its development within the past five years
- It must have a significant U.S. component
- It must fit within at least one of the three focus areas of the program
If you have a question about whether your technology meets the scope of the program, please email us at email@example.com or call (202) 564-8740.
1. Green chemistry technologies
Green chemistry technologies are extremely diverse. As a group, they…
- Improve upon all chemical products and processes by reducing negative impacts on human health and the environment relative to competing technologies
- Include all chemical processes: synthesis, catalysis, reaction conditions, separations, analysis, and monitoring
- Make incremental improvements at any stage of a chemical’s lifecycle, for example, substituting a greener feedstock, reagent, catalyst, or solvent in an existing synthetic pathway
- May substitute a single improved product or an entire synthetic pathway
- Benefit human health and the environment at any point of the technology’s lifecycle: extraction, synthesis, use, and ultimate fate
- Incorporate green chemistry at the earliest design stages of a new product or process
- Contain a significant amount of chemistry, although they may also incorporate green engineering practices
2. Source reduction
For this program, EPA defines green chemistry as the use of chemistry for source reduction. Chemical technologies that include recycling, treatment, or disposal may meet the scope of the program if they offer source reduction over competing technologies. Read how green chemistry differs from cleaning up pollution (remediation).
3. Eligible organizations
Companies (including academic institutions and other nonprofit organizations) and their representatives are eligible for Presidential Green Chemistry Challenge Awards for outstanding or innovative source reduction technologies.
Public academic institutions, such as state and tribal universities and their representatives, are eligible for Presidential Green Chemistry Challenge Awards for technologies that prevent, reduce, or eliminate air or water pollution or the adverse health effects of solid waste entering into the waste stream.
4. Significant milestone
A green chemistry technology must have reached a significant milestone within the past five years. Some examples are: critical discovery made, results published, patent application submitted or approved, pilot plant constructed, and relevant regulatory review (e.g., by EPA under TSCA, FIFRA, or CAA; by the U.S. Food and Drug Administration under FFDCA) initiated or completed, and technology implemented or launched commercially.
5. Significant U.S. component
A significant amount of the research, development, or other aspects of the technology must have occurred within the United States. If the only aspect of the technology within the United States is product sales, the technology may not meet the scope of the program.
6. Focus areas of the Presidential Green Chemistry Challenge
Green chemistry technologies fit into at least one of the three focus areas below. Technologies that do not fit within at least one focus area may not fall within the scope of the program.
Focus Area 1: Greener Synthetic Pathways
This focus area involves designing and implementing a novel, green pathway to produce a new or existing chemical substance.
Examples include synthetic pathways that:
- Use greener feedstocks that are innocuous or renewable (e.g., biomass, triglycerides)
- Use novel reagents or catalysts, including biocatalysts and microorganisms
- Use natural processes, such as fermentation or biomimetic syntheses
- Are atom-economical
- Are convergent syntheses
Focus Area 2: Greener Reaction Conditions
This focus area involves improving conditions other than the overall design or redesign of a synthesis. Greener analytical methods often fall within this focus area.
Examples include reaction conditions that:
- Replace hazardous solvents with solvents that have less impact on human health and the environment
- Use solventless reaction conditions and solid-state reactions
- Use novel processing methods that prevent pollution at its source
- Eliminate energy- or material-intensive separation and purification steps
- Improve energy efficiency, including reactions running closer to ambient conditions
- Reduce greenhouse gas emissions
Focus Area 3: The Design of Greener Chemicals
This focus area involves designing and implementing chemical products that replace more hazardous products.
Examples include chemical products that are:
- Less toxic than current products
- Inherently safer because they reduce the likelihood or severity of accidents
- Recyclable or biodegradable after use
- Safer for the atmosphere (e.g., do not deplete ozone, form smog, or contribute to climate change)
Nominated chemistry technologies that meet the scope of the program will be judged on how well they meet the following three selection criteria:
A. Science and innovation
The nominated chemistry technology should be innovative and of scientific merit.
The technology should be, for example:
- Original (i.e., never employed before) and
- Scientifically valid, that is, can the nominated technology or strategy stand up to scientific scrutiny through peer review? Does the nomination contain enough chemical detail to reinforce or prove its scientific validity? Has the mechanism of action been clarified via scientific research?
B. Human health and environmental benefits
The nominated chemistry technology should offer human health and/or environmental benefits at some point in its lifecycle from resource extraction to ultimate disposal. Quantitative statements of benefits are more useful to the judges than are qualitative ones.
The technology might, for example:
- Reduce toxicity (acute or chronic) or the potential for illness or injury to humans, animals, or plants
- Reduce flammability or explosion potential
- Reduce the use or generation of hazardous substances, the transport of hazardous substances, or their releases to air, water, or land
- Improve the use of natural resources, for example, by substituting a renewable feedstock for a petrochemical feedstock
- Save water or energy
- Reduce the generation of waste, even if the waste is not hazardous
C. Applicability and impact
The nominated chemistry technology should have a significant impact. The technology may be broadly applicable to many chemical processes or industries; alternatively, it may have a large impact on a narrow area of chemistry. Commercial implementation can support the applicability and impact of a technology. Nominations for pre-commercial technologies should discuss the economic feasibility of the technology.
The nominated technology should offer three advantages:
- A practical, cost-effective approach to green chemistry
- A remedy to a real environmental or human health problem
- One or more technical innovations that are readily transferrable to other processes, facilities, or industry sectors
A. How to enter
1. Basic information
- The deadline for nominations for the 2015 Presidential Green Chemistry Challenge is December 31, 2014. Awards for 2015 will be presented in the summer of 2015.
- Self-nominations are typical.
- There is no entry fee.
- There is no standard entry form, but nominations must meet certain requirements or EPA may reject them.
- You may nominate more than one technology, but you must submit a separate, stand-alone nomination for each one. Multiple applications of the same general technology are most likely to win an award if you combine them in a single nomination.
Nominations must have:
Nominations may include:
- No more than eight pages, including the cover page
- Single-spaced, 12-point type, but references, captions, and footnotes may be as small as 10-point type
- Margins of at least 1 inch when printed on 8½-by-11-inch paper
- Chemical reactions, tables, graphs, charts, photographs, diagrams, and other illustrations within their eight pages
- Text or illustrations in color, but the judges may read the nominations printed in black and white; therefore, nominations should not require color for interpretation.
- Links to published articles, patents, etc. Nominations should not rely on information in links to present their technology because judges may not follow any links.
Structure of submission materials:The first page must be a cover page with the:
The second page should contain the following information:
- Technology title and date of the nomination
- Primary sponsor(s): the individual or organizational owner(s) of the technology. For academic nominations, the primary sponsor is usually the principal investigator. For nominations with more than one sponsor, each co-sponsor should have had a significant role in the research, development, or implementation of the technology
- Contact person with full mailing address, email address, and telephone number: the one individual with whom EPA will communicate regarding the nomination. For academic nominations, the contact person is usually the principal investigator. For other nominations, the contact should be a project manager or other technical representative. We add the person listed as the contact to the list of subscribers for our electronic newsletter. Periodically, we email reminders and updates about the program to those on our list. You may opt out at any time.
- Contributors (optional): those individuals or organizations that provided financial or technical support to develop or implement the technology
- Technology title
- A sentence indicating whether the nominated technology is eligible for the small business award, academic award, both, or neither.
- The name (or number) of the EPA award focus area that fits your technology. One-or two-line description of the most recent milestone for the nominated technology and the year it occurred. Only one milestone and year are required; the milestone must be within the last five years.
- One or two sentences describing the U.S. component of the technology: the research, development, implementation, or other activities of the technology that occurred within the United States.
- An abstract (not to exceed 300 words) that describes the nominated technology, the problem it addresses, and its benefits. Include the degree of implementation (or commercialization) of the technology and any quantitative benefits such as the amount (or potential amount) of hazardous substances eliminated, energy saved, carbon dioxide emissions eliminated, water saved, etc. EPA plans to publish these abstracts in its annual Summary of Award Entries and Recipients. If you are nominating a technology you submitted in a previous year, you may use the abstract previously published by EPA in whole or in part. Links to previous annual summaries of award entries and recipients are available on the Green Chemistry award winners page.
The information in this section should fit on page 2, but you may continue on page 3 if necessary.The remaining pages should show how your technology meets both the:
- The problem (environmental or human health risk) that your technology addresses, its importance, and how your technology solves it.
- The chemistry of your new technology, emphasizing its novelty and scientific merit. To be eligible for an award, your technology must include a significant chemistry component. Include as much nonproprietary detail as possible, such as the specifics of your chemistry and detailed reaction pathways. Consider using chemical structure diagrams to describe your chemistry. You may include patent numbers or references to peer-reviewed publications, but add only the most important, recent ones because references take space away from other details of your technology.
- Realized or potential benefits and drawbacks. These may occur across all stages of your technology’s lifecycle: from feedstocks to manufacture, use, and the ultimate disposal of the product. Include the human health, environmental, and economic benefits of your technology such as toxicity data and quantities of hazardous substances reduced or eliminated. If you have not done a full lifecycle analysis, discuss the impacts of your technology across the lifecycle to the extent you know them.
- How your technology compares with any other technologies that address the same problem. Comparing the cost, performance, and environmental profile of your technology with any competing technologies may demonstrate the broad applicability of your technology.
- Current and planned commercialization. For example, is your technology currently on the market? Are you building a pilot or manufacturing plant? If your technology is or is about to be commercially available, also discuss the regulatory status of any novel chemical substance or organism under any applicable laws such as TSCA, FIFRA, CAA, or FFDCA. EPA must assure that winning technologies comply with these laws.
3. Submitting your nomination to EPA
Submit an electronic copy of your nomination in a format so that EPA can select and copy text. Include the primary sponsor’s name in the file name. You may want to submit your nomination as a .pdf file to minimize possible reading errors, but EPA accepts and can read all common file types. Send the electronic copy by email to firstname.lastname@example.org. If you encounter problems submitting your nomination electronically, please contact us at email@example.com or (202) 564-8740.
B. Receipt of nominations
- EPA will consider all entries as public information.
- EPA will not return any material.
- EPA is not responsible for lost or damaged entries.
- EPA acknowledges receipt of nominations by email to the Contact Person identified in the nomination. If EPA does not acknowledge your nomination within two weeks after you submit it, please contact us at firstname.lastname@example.org or (202) 564-8740.
C. Judging entries
A panel of technical experts convened by the American Chemical Society Green Chemistry Institute® will judge nominations. These anonymous experts might include members of the scientific, industrial, governmental, educational, and environmental communities. EPA may ask the designated contact person to verify any chemistry described or claims made in nominations on behalf of the judges. The judges will select as award recipients those green chemistry technologies that best meet the selection criteria. The judges may use their discretion, however, to make more than one award (or no award) in any one category.
D. Notification of winners
EPA will notify winners prior to the official public announcement. EPA will present a commemorative crystal sculpture to the primary sponsor(s) of the winning green chemistry technology in each of the five award categories and certificates to individuals identified by the primary sponsor(s) who contributed to the research, development, or implementation of the technology.
If you have questions about the scope of the program, nomination procedures, or the Presidential Green Chemistry Challenge Program, please email EPA’s Industrial Chemistry Branch at email@example.com or call (202) 564-8740.